GEM5000 gas analyzer 5K-MNL-GEM5000
9.7 Gas Check / Calibration history
The GEM5000 gas analyzer has the facility to log user calibrations.
These are visible within the instrument. At this time LANDTEC System
Gas Analyzer Manager (LSGAM) is not able to download the user
calibration information. To view the Gas Check information.
Select the ‘Menu’ key.
1) Select soft-key ‘Operation Settings’.
2) Select ‘Key 1 - Gas Check’.
3) Select ‘Key 3 – History’.
4) The operator may view the calibration data stored. Use the soft-key ‘Filter’ to add a
sort filter to the history enquiry.
9.8 Gas Check Summary
The GEM5000 gas analyzer has the facility to display the logged Gas
Checks. These are visible within the instrument. At this time LANDTEC
System Gas Analyzer Manager (LSGAM) is not able to download the
History. To view the Gas Check history, perform the following:
Select the ‘Menu’ key.
1) Select soft-key ‘Operation Settings’.
2) Select ‘Key 1 - Gas Check’.
3) Select ‘Key 4 – Summary.
LANDTEC Page 111
To Next Page
Loading...
