5K-MNL-GEM5000 GEM5000 Gas Analyzer
Manual guidelines
0.5 Document history
‘Gas Check’ Changes for
Firmware v1.5.15 +
0.6 Hazard warnings and safety symbols
Information in this manual that may affect the safety of
users and others is preceded by the warning symbol.
Caution - Failure to follow the correct information
may result in physical injury which in some cases
could be fatal. If the equipment is used in a manner
not specified by the manufacturer, the protection
provided by the equipment may be impaired.
0.7 General product label symbols are listed as follows:
CE conformity-The CE-
marking is the manufacturer's
statement to the EU
authorities that the product
complies with all relevant CE-
marking Directives.
If the CSA mark appears with
the indicator "US" or "NRTL" it
means that the product is
certified for the U.S. market, to
the applicable U.S. standards.
VDE mark is a symbol for
electrical, mechanical,
thermal, toxic, radiological
and other hazards.
Separate collection, handling
and disposal for waste electrical
and electronic equipment and
its components.
Refer to operators manual.
Double insulated construction
- does not require an Earth.
Specific marking of explosion
protection (ATEX only).
Equipment group and
category. G = gases; the type
of explosive atmosphere.
IECEx licensed mark
(IECEx only).
Equipment for indoor use only.
Page 6 Copyright LANDTEC North America, Inc. V1.13
To Next Page
Loading...