5K-MNL-GEM5000 GEM5000 Gas Analyzer
Figure 26—Adjust Flow Fail
3) Manual adjustment of the flow fail is available via this option and can be carried out
with use of ‘Key 4 – Scroll left’ ( ) less sensitive and ‘Key 6 – Scroll right’ (>) more
sensitive.
4) Select the soft-key ‘Save’ to store the setting or select soft-key ‘Exit’ to exit the
screen without saving the change.
5) The operator will return to the ‘Operation settings’ menu.
Note: Changing the flow fail setting to a less sensitive setting may decrease
the life of the pump. The default setting displays the bar in the
center. BEFORE altering this setting, please contact Technical Support at +1 (909)
783-3636 or email technical@landtecna.com
7.3.7 Technician login
This option enables the operator to select from a pre-defined technicians or
to add a Technician ID. All subsequent readings will be tagged with this
Technician Login ID.
1) Select the ‘Menu’ button on the front of the analyzer to
display the ‘Device Settings’ menu. Press the soft key to display ‘User Settings’.
2) Select ‘Key 6 – Technician login’ and the following screen is displayed:
Figure 27—Technician Login
Page 76 Copyright LANDTEC North America, Inc. V1.13
To Next Page
Loading...
