GEM5000 gas analyzer 5K-MNL-GEM5000
Figure 12—Date and Time
2) Select ‘Key 1 – Set Date’ and key in the required date. Type the date using the
numeric keypad. Press the soft-key ‘Date Format’ to toggle and select the required
date format i.e. dd/mm/yy. Press the ‘Enter’ key to confirm and update the date
setting.
3) Select ‘Key 2 – Set Time’ and key in the required time (hh:mm). Type the time
using the numeric keypad and press the ‘Enter’ key to confirm the update.
4) The operator may also change the default time zone. Selecting the ‘Key 4 Scroll-
left’ or ‘Key 6 – Scroll right’ to move through the different time zones. Press the
‘Enter’ key to confirm your default setting.
5) Select the soft-key ‘Exit’ to exit and return to the ‘Device Settings’ menu.
7.2.2 Bluetooth
This option enables the operator to utilize Bluetooth technology. This
may be useful when downloading gas readings from the analyzer to the
PC instead of connecting the analyzer to a PC via a USB cable.
Bluetooth.
1) Select the ‘Menu’ key on the front of the analyzer to display the ‘Device Settings’
menu.
2) Select ‘Key 2 – Bluetooth’ and the following screen is displayed:
LANDTEC Page 63
To Next Page
Loading...
