GEM5000 gas analyzer 5K-MNL-GEM5000
3) Use the cursor keys to move throughout the list of IDs displayed; select the ‘Enter’
key to select choice of ID, default if no IDs are listed.
4) Alternatively you may Add a new technician to the list by clicking the soft-key ‘Add’
Press the ‘1’ key to enter in the initials. The initials field will turn green. Tap each
key on the keyboard repeatedly similar to a cell phone text entry until the desired
letters are entered. When done press the enter key. Press the ‘2’ key to enter the
Full Name of the technician.
Once done, press the soft-key ‘Add’.
5) The operator will return to the ‘User settings’ menu.
Note: If no technicians are loaded via LSGAM this section is skipped during
start up and the ‘Technician ID’ icon is removed from the menu.
7.4.6 Exit menu
1) Press the ‘Menu’ button on the front of the analyzer to exit settings.
LANDTEC Page 77
To Next Page
Loading...
