LANDTEC GEM5000 - Device Information; Space Has Been Left for a Future Feature; Navigation (Optional)

5K-MNL-GEM5000 GEM5000 Gas Analyzer
Figure 13—Bluetooth Menu
3) Enter the ‘Pairing PIN’ value when prompted by your computer for the device’s
pairing code.
4) Select soft-key ‘Exit’ to exit the screen and return to the ‘Device Settings’ menu.
7.2.3 Device information
This option displays default instrument information and settings such
as serial number, service due date, last zero calibration date and last
span calibration date.
1) Select the ‘Menu’ key on the front of the analyzer to display the ‘Device Settings’
menu.
2) Select ‘Key 3 – Device Information’ and the following screen is displayed:
Legacy
Figure 14—Device Information
3) The information displayed on this screen is informational only and cannot be
edited by the operator. The operator may be asked for serial number, service due
date and version number information when contacting LANDTEC.
Note: The comms setting ‘Legacy’ mode is for use with LSGAM. GA5K mode is
reserved for future applications.
4) Select soft-key ‘Exit’ to exit the screen and return to the ‘Device Settings’ menu.
7.2.4 Space has been left for a future feature
1) Select the ‘Menu’ key and the ‘Device Settings’ menu is displayed.
2) The ‘Key 4’ has been reserved for future functionality.
7.2.5 Navigation (optional)
Page 64 Copyright LANDTEC North America, Inc. V1.13