GEM5000 gas analyzer 5K-MNL-GEM5000
3.2.3 H2S filter (optional)
The GEM5000 gas analyzer has the capability to use an H2S filter and is required as
standard if the compensated CO cell is fitted and configured at the time the instrument
is manufactured. H2S gas can have a cross-gas effect on the CO reading. By using a
filter, the H2S is removed from the gas sample, therefore providing a more accurate CO
reading.
The filter only needs to be used when you are trying to get rid of any possible cross gas
effects H2S might have on other gases. Do not use the filter on other monitoring points.
For additional information related to H2S filters please refer to
http://www.landtecna.com.
3.2.4 GPS (optional)
An optional GPS feature is available for the GEM5000 gas analyzer. It enables the gas
technician to automatically locate sample locations using GPS satellite signal from
predefined sample location IDs uploaded from LANDTEC System Gas Analyzer Manager
or set on the analyzer when out in the field prior to taking a reading. The GPS reading
data is stored with each reading providing an audit trail, as it confirms where the
reading was taken.
3.2.5 Bluetooth dongle (optional)
An optional Bluetooth feature enables the operator to set and utilize Bluetooth
technology. This may be useful when downloading gas readings from the analyzer to
the PC instead of connecting the analyzer to a PC via a USB cable. Bluetooth comes
standard on many portable computers. For desktop / stationary computers, Bluetooth
is activated by plugging the dongle into a pc USB port. The analyzer’s Bluetooth
discovery is activated by switching on the Bluetooth discovery option feature in the
settings menu on the analyzer.
3.3 Instrument accessory products
Optional accessory and replacement parts must ONLY be purchased for the
GEM5000 gas analyzer directly from LANDTEC or an authorized distributor. Please
contact Sales@landtecna.com for further details on pricing and how to order.
High Visibility Hard carry case
LANDTEC Page 17
To Next Page
Loading...