LANDTEC Page 61
5K-MNL-GEM5000 GEM5000 Gas Analyzer
7 Operator settings
7.1 Menu key
The ‘Menu’ key enables the operator to select options to set up specific
parameters and perform operational tasks prior to sample readings being
taken or to view data and information stored in the instrument.
1) Select the ‘Menu’ key on the front of the analyzer and the following screen is
displayed:
Figure 11—Device Settings
2) Press the relevant numeric key on the analyzer keypad to select the desired menu
option.
3) To exit this menu, select the soft-key ‘Exit’ on the front of the analyzer and the
operator is returned to Main Gas Read Screen.
7.2 Device settings
7.2.1 Date and time
This option enables the operator to set the instrument date and time or to
receive and update the settings automatically from satellite signal.
1) Select the ‘Menu’ key on the front of the analyzer to display the ‘Device Settings’
menu followed by ‘Key 1 – Date and Time’ and the following screen is displayed:
Page 62 Copyright LANDTEC North America, Inc. V1.13
To Next Page
Loading...
