degrees, minutes, seconds, and decimal seconds.
The Greenwich meridian defines the zero point.
m
3
/hr Meters cubed per hour – volumetric flow rate
measurement.
Main Gas Read
Screen
Material safety data
sheet
MCERTS
certification
The main analyzer screen for normal operations
and all operations are carried out from this screen.
Document from which information about a certain
substance can be obtained. This document contains
relevant health & safety information along with
physical characteristics of the substance.
MCERTS is the UK Environment Agency's Monitoring
Certification Scheme. The scheme provides a
framework within which environmental
measurements can be made in accordance with the
Agency's quality requirements. The scheme covers
a range of monitoring, sampling and inspection
activities.
Memory Location where data and ID information is stored.
The analyzer memory should not be used as a
permanent storage medium. Stored data should be
regularly transferred using the LSGAM download
software.
NO2 Nitrogen dioxide
Operating language The operator can choose the default operating
language for the analyzer. Choices are English,
Spanish, and Portuguese.
PPM Parts per million
Pump Used to draw the gas sample from the sample point
to the analyzer.
Select the pump key on the analyzer to activate.
Relative pressure The pressure at the sample point ‘relative’ to
atmospheric (barometric) pressure.
Relative pressure The internal component used to measure the relative
transducer pressure.
Sample tube The tube used to obtain a sample of gas from the
sample point to the analyzer.
Satellite This is the number of satellites that the system can
select. Four satellites will give a reasonable position.
Eight or more satellites will increase the position of
Page 122 Copyright LANDTEC North America, Inc. V1.13
GEM5000 gas analyzer 5K-MNL-GEM5000
the accuracy. (lower HError, VError and HDOP
numbers)
To Next Page
Loading...
