5K-MNL-GEM5000 GEM5000 Gas Analyzer
Upon clicking on Delete Selected Device Id(s) you will see the line strikeout.
The computer Icon will now display a red asterisk over the image
. This indicates that the IDs are
NOT saved. Deleted IDs are displayed with a line through the information on the screen. To restore a
deleted ID, right click on the ID and click Restore Selected Device ID(s).
Note: Deleted ID’s can only be restored while the project state is unsaved. Once saved, the ID changes
are saved and restoration cannot be completed.
Once all work with the device ID’s is complete, click on the Save button.
After clicking on OK, the device is removed and the computer icon returns to the unaltered state __ .
Page 40 Copyright LANDTEC North America, Inc. V1.13
To Next Page
Loading...
