Network
E220 Series Cellular Router User Guide 97
a. General Setup
Screen 10-20: General Configurations for DHCP Server
Parameters Description
Ignore Interface Check to disable the DHCP interface.
Note
• If DHCP is disabled for this interface, all the LAN devices
connected to the router should have a static LAN IP
configured.
Start Lowest leased address as offset from the network address.
Example – if your LAN IP address is 192.168.1.1 and the parameter
Start is configured as 100, then the starting IP Address of the leased
IP Address range is 192.168.1.100
Limit Maximum number of leased addresses that can be configured.
Example – if your LAN IP Address is 192.168.1.1, the parameter
Start is configured as 100, and parameter Limit is configured as
150, then a total of 150 devices are configured. Thus the leased IP
Address range is 192.168.1.100 to 192.168.1.249.
Leasetime Remaining time until which the device can use the DHCP server
leased IP Address.
Note
• IP address allocated by the router will disappear from the
Wi-Fi / Overview / Associates stations list only after
individual lease time for each IP expires.
Table 10.1-20: General Configurations for DHCP Server
To Next Page
Loading...