Lantronix SLC 8000 Series

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 328
admin config rename|delete
Syntax
admin config delete <Config Name> location <local|nfs|cifs|usb|sdcard>
[usbport <U1|U2>] [nfsdir <NFS Mounted Directory>]
admin config rename <Config Name> location <local|nfs|cifs|usb|sdcard>
[usbport <U1|U2>] [nfsdir <NFS Mounted Directory>]
Description
Deletes or renames a configuration.
admin config factorydefaults
Syntax
admin config factorydefaults [savesshkeys <enable|disable>] [savesslcert
<enable|disable>] [preserveconfig <Config Params to Preserve>]
[savescripts <enable|disable>]
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
Description
Restores the SLC unit to factory default settings.
admin config restore
Syntax
admin config restore <Config Name> location
<local|ftp|sftp|nfs|cifs|usb|sdcard> [nfsdir <NFS Mounted Directory>]
[usbport <U1|U2>] [preserveconfig <Config Params to Preserve>]
[savesshkeys <enable|disable>]
[savesslcert <enable|disable>]
[savescripts <enable|disable>]
nt
Networking
sv
Services
dt
Date/Time
lu
Local Users
dp
Device Ports
ra
Remote Authentication
ub
USB Port/SD Card