Lantronix SLC 8000 Series

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 329
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
Description
Restores a saved configuration to the SLC 8000 advanced console manager.
admin config save
Syntax
admin config save <Config Name> location
<local|ftp|sftp|nfs|cifs|usb|sdcard> [nfsdir <NFS Mounted Dir>] [usbport
<U1|U2>]
[savesshkeys <enable|disable>]
[savesslcert <enable|disable>]
[savescripts <enable|disable>]
Description
Saves the current SLC configuration to a selected location.
admin config show
Syntax
admin config show <local|ftp|sftp|nfs|cifs|usb|sdcard> [nfsdir <NFS
Mounted Dir>] [usbport <U1|U2>]
Description
Lists the configurations saved to a location.
admin firmware bootbank
Syntax
admin firmware bootbank <1|2>
Description
Sets the boot bank to be used at the next SLC reboot.
nt
Networking
sv
Services
dt
Date/Time
lu
Local Users
ra
Remote Authentication
dp
Device Ports
ub
USB Port/SD Card