Lantronix SLC 8000 Series

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 384
set network dnsipv4prec
Syntax
set network dnsipv4prec <enable|disable>
Description
Configures IPv4/IPv6 lookup precedence.
set network gateway
Syntax
set network gateway <parameters>
Parameters
default <IP Address>
ipv6default <IPv6 Address>
precedence <dhcp|default>
failover <IP Address>
pingip <IP Address>
ethport <1|2>
pingdelay <1-250 seconds>
failedpings <1-250>
faildevice <none|hspa|sierra>
faildevapn <Fail-over Device: APN of Mobile Carrier>
faildevlockpin <enable|disable>
faildevlogin <Fail-over Device: Admin Login>
faildevcelluser <Fail-over Device: SIM Login>
faildevcellpwd <Fail-over Device: SIM Password>
faildevcelldialstr <Fail-over Device: Dialup Str>
faildevcellroam <enable|disable>
Transfer firmware update files to the SLC to initiate a firmware update on the fail-over device:
set network gateway faildevupdate <ftp|sftp|scp|usb|sdcard>
gwfile <Firmware File> radiofile <Radio File> [usbport <U1|U2>]
[host <IP Address or Name>] [login <User Login>] [path <File
Path>]
Reboot the fail-over device, or set the fail-over device SIM Card PIN #, SIM Personal Unblocking
Key or Admin Password (any extra parameters will be ignored):
set network gateway reboot
set network gateway faildevpin
set network gateway faildevpuk
set network gateway faildevpassword