LT-3100 User & Installation Manual Rev. 1.06 Interfaces
Lars Thrane A/S www.thrane.eu Page 30 of 155
The SIM card will be delivered from the Iridium Service Provider (ISP) together with the essential
information:
• MSISDN number (the Iridium voice number)
• ICC-ID
• PIN codes
• PUK codes
The SIM card will be delivered with the SIM lock feature disabled. Thus, the LT-3100 system will be
operational as soon as the SIM card is inserted.
If the user decides to activate the SIM lock function from the UI display, then the PIN code is required next
time the LT-3100 system is powered up. Change of the SIM card PIN code can only be performed, if the PIN
lock is enabled. If changing the SIM card PIN code, then the SIM card default PIN code cannot be restored,
and the new PIN code must be used to unlock the SIM card and the Iridium services.
Ethernet RJ45 (LAN)
The LT-3110 Control Unit has an Ethernet LAN (RJ-45) interface, currently supporting service &
maintenance. The Ethernet interface must be used to access the built-in web server, which is further
described in Web server on page 100.
The LT-3110 Control Unit will automatically request and obtain an IP address when connected to a Local
Area Network (LAN) with a DHCP server (e.g. a router). If connecting the LT-3110 Control Unit directly to a
PC, the two will automatically negotiate an IPv4 Link-Local address. The current IP address can be found in
the user interface display (Menu -> System -> Network: IP Address).
To Next Page
Loading...
Need help?
General
