LT-3100 User & Installation Manual Rev. 1.06 Accessories
Lars Thrane A/S www.thrane.eu Page 4 of 155
Accessories
Mounts
The following accessory parts are not part of the basic system and must be ordered separately:
• 91-100772 Flush Mount, Control Unit
• 91-100774 Pole Mount (1.5” pipe, 38.8mm), Antenna Unit
• 91-102520 Pole Mount (2.0” pipe, 53.0 mm), Antenna Unit
• 91-102469 Bracket Mount (1.5” to 2.5” pipe), Antenna Unit with Cable Hose (discontinued)
• 91-102470 Cable Hose (standalone)
In order to avoid corrosion when using the Bracket Mount (1.5” to 2.5” pipe), we have introduced a Cable
Hose for the antenna unit, which is recommended to use for all installations using this mount. The Cable
Hose is illustrated in Figure 23 on page 22.
Cable and connectors
The following cable and connector parts are not part of the basic system and must be ordered separately:
• 91-100768 Aux Cable, 3m
• 91-101183 Coaxial cable Ø4.9mm, 10m
• 91-101184 Coaxial cable Ø4.9mm, 25m
• 91-101137 Coaxial Cable Ø10.3mm 10m
• 91-101138 Coaxial Cable Ø10.3mm 25m
• 91-101139 Coaxial Cable Ø10.3mm 50m
• 91-101140 N Conn. (male) for Coaxial Cable Ø4.9mm
• 91-101186 N Conn. (male) for Coaxial Cable Ø10.3mm
• 91-101187 Crimping Tool for Coaxial Cable Ø4.9mm
• 91-101188 Crimping Tool for Coaxial Cable Ø10.3mm
Coaxial cables are delivered with one fixed N connector (outdoor mounting), another loose N connector
and crimp parts comes with the cable. It is required to use an appropriate crimping tool for attaching the
loose N connector.
NOTE: For further details on the cable and connectors, please contact Lars Thrane A/S. A coaxial
cable up to a length of 500 meters can be used for connecting the LT-3110 Control Unit and
the LT-3130 Antenna Unit. Details about the coaxial cable, specification, and cable lengths,
are described in LT-3130 Antenna Unit on page 11.
To Next Page
Loading...
Need help?
General
