Laser Technology TruPoint 300 - Adjusting Measuring Reference

Laser Technology Inc. - TruPoint
™
300
40
ENFunctions
Adjusting measuring reference
1
2
3
Distance is measured
from the rear of the de-
vice (standard setting).
Distance is measured
from the front of the de-
vice (lock symbol = per-
manently).
i
The orienta-
tion of the
Smart Base is
automatically
detected and
the zero point
is accordingly
adjusted.
4
Confirm setting.
i
If device is
switched off,
reference
goes back to
standard set-
ting (rear of
the device).