Need help?Do you have a question about the Lattec Herd Navigator and is the answer not in the manual?
General| Brand | Lattec |
|---|---|
| Model | Herd Navigator |
| Category | Farm Equipment |
| Language | English |
Details changes and updates across document versions.
Lists and explains error codes generated by the HSM system.
Addresses errors related to VMS and sampler operations within HSM.
Provides guidance for diagnosing and resolving sampler-specific issues.
Explains how to use the "Sample all" feature for troubleshooting.
Covers procedures and best practices for the Sample Intake unit.
Details the process for thoroughly cleaning the milk transport system.
Explains how to measure water volumes during the AI cleaning process.
Describes how to adjust the dosage needle's cleaning position.
Step-by-step instructions for manually closing the analyzer hatch.
Guide for replacing AI modules and performing service.
Illustrates the connection and integration of HN and C200 in the parlour.
Details the cleaning sequence involving C200 and HN systems.
Lists and explains the C200 system parameters relevant to cleaning.
Outlines AC and SC parameters affecting the cleaning process.
Describes the SI parameter influencing the cleaning process.
Presents C200 parameters observed in different HN farm configurations.
Procedure for recalibrating the sampler's milk transfer time value.
Provides a detailed overview of the SI menu structure and options.
Presents a comprehensive guide to the AI's menu hierarchy.
Outlines the menu structure and options available on the AC.
Instructions for properly connecting the AI to the drain system.
Illustrates tube connections for the Sampler version II.
Step-by-step guide for replacing the CIP box.
Contains information related to the Analysis Controller (AC).
Procedures for updating firmware on HN system units.
Guide for updating bootloader versions on system boards.
Instructions and guidance for programming samplers.
Steps for updating FPGA software on the HN2 AI unit.
Configuration steps for HN2 AI initial network setup.
To Next Page