April 8, 2011 HN FAQ Memo, Version 2.0 Page 79 of 108
5 Appendices:
5.1 AC
5.1.1 Remote connection to AI or SI trough AC whit ethernet :
In windows, run telnet X.X.X.X where X.X.X.X is the IP address of the AC.
Login = Lattec password = Merkur
Then you get :
Pres M for Menu :
Press 4 for service menu.
Press 7 for Remote MMI
Enter the node address to acces (SI = 10, AI = 19)
Now you are controlling the selected node address :
To Next Page
Loading...