April 8, 2011 HN FAQ Memo, Version 2.0 Page 82 of 108
The DSM Services are stopped by pressing the Stop button. A dialog asking “Disable Auto
Start?” will be shown. Answer “Yes”.
2: Update orders in AC:
Press the “update orders in AC” to Resend orders defined in the DSM to the AC.
(This feature is only enabled if the DSM services are stopped)
3: Start Herd Navigator DSM:
The DSM Services are started again by pressing the Start button. A dialog asking “Enable Auto
Start?” will be shown. Answer “Yes”.
Check that the service is running, ( “green cow” ) and that the “enable auto start” is checked.
IMPORTANT: Never press the “delete orders in DSM/AC, as this will delete all calculated
orders.
To Next Page
Loading...