Proline Low-temperature Thermostats
26 Starting up YACE0072 / 21.08.07
− Display for
KDTDK (low level) appears when the bath has too
little liquid.
− Red LED
above the fault triangle flashes.
− Find cause of fault and, where necessary, top up missing heat
carrier liquid (Ì Section 6.3).
− Press the Enter key.
− Also, pres
s the key if unit has been switched off in the fault state.
− No release is possible
on Command Console!
Command
Language
− If the Command Console is being
switched on for the first time, the
illustrated window appears automatically,
enabling you to select the dialog language
with the appropriate soft key.
− The dialog language also can be changed
later via
Æ Settings Æ Basic settings Æ
Language .
− Mark the required language with or
.
− Confirm the selection with .
Level alarm
KDTDK
°C
Hel
Menu End T
set
T
fix
English
Deutsch
Français
Español
Display
Sounds Master
Sounds Command
Language
Master-Mode
Autostart
Current Consumpt.
English
Deutsch
Français
Español
To Next Page
Loading...
