Lauda RP 855 - Safety System Configuration; Setting Safety Parameters and Volumes

Proline Low-temperature Thermostats
YACE0072 / 21.08.07 Starting up 47
7.6.9 Submenu LMnet Æ RDC-- (Master): Safety system settings
The safety modul takes care of all safets related tasks. It is integrated in the Master and it cannot be
plugged in and out as other modules can. Some settings as adjusting the acoustic alarm level of
messages or to view parameters (
RG/VW ) can be accessed over the Master settings as well.
Safety Parameters
RDC--
°C
Display flashes. Set
with or .
Range: 0 ... 3 Ì 7.8.6.
Alarm volume
@K 2
°C
Display flashes. Set
with or between
Range: 0 ... 3 Ì 7.8.6.
Warning volume
VW 2
°C
Display flashes. Select @K@,
VWG, VW, lml
with or .
Ì 7.14.3.
High-level warning
lGVW
°C
The works setting (default)
of the internal control
parameters has been
restored and
cmlD is
displayed.
longer
than
3Sec.
Works setting
cDE
°C
End
Dlc
°C
Show safety values
RgmY[
°C
Show the safety system
values from Ì 7.6.8 and
more specific safety data.