Launch X-431 EURO TAB II

To Next Page

To Previous Page

X-431 EURO TAB II User Manual

Fig. 5-18

Clear DTCs:

Tap to clear the existing diagnostic trouble codes.

*Note: Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If

proper repairs to correct the problem that caused the code(s) to be set are not made, the

code(s) will appear again and the check engine light will illuminate as soon as the

problem that cause the DTC to set manifests itself.

5.2.2 System Scan

This option allows you to quickly scan which systems are installed on the

vehicle.

In Fig. 5-13, tap “System Scan”, the system start scanning the systems. Once

the scanning is complete, the screen will display the result.

Diagtools

Launch X-431 EURO TAB II - Display Modes