X-431 EURO TAB II User Manual
71
diagnostic tool.
3
Power LED
It keeps steady on (red) after the sensorbox
is powered on.
4
Type-B data I/O port
Connect the Sensorbox to the diagnostic tool
with data cable.
5
Power connector
Connect to power supply through the power
adaptor.
6
COM Common terminal of multimeter
7
VΩHz Testing terminal of multimeter
9.2.2 Sensorbox accessories
The sensorbox accessories include sensor test cable, probe etc. For detailed
items, please see the packing list.
Below formulates the Sensorbox accessories:
No.
Name
Picture
1 Sensor test cable
2 Sensor probes
3
Data cable
Connects the Sensorbox and diagnostic
tool so that the sampled signal can be
displayed on the diagnostic tool.
4
Power adaptor
(c) Launch & Diagtools. Tel. +37167704152, +37129416069. www.diagtools.lv
To Next Page
Loading...
