X-431 EURO TAB II User Manual
67
8 ADAS
By default, the ADAS calibration feature of the pre-installed diagnostic software
is disabled. To ensure normal use of the calibration function of the diagnostic
software, you need to activate the pin card to unlock the calibration function on
the X-431 EURO TAB II tablet first.
Follow the steps below to activate it.
1. Tap “ADAS” on the home screen. If the ADAS is not activated, the following
prompt screen displays.
Fig. 8-1
2. Tap “Activate” to enter the ADAS activation screen.
(c) Launch & Diagtools. Tel. +37167704152, +37129416069. www.diagtools.lv
To Next Page
Loading...
