Launch X-431 EURO TAB II - 5.5 How to Feedback Diagnostic Logs?

X-431 EURO TAB II User Manual
50
File: Choose diagnostic reports or local files to send.
Picture: Choose screenshots or pictures to send.
Remote Diagnostic: To start a remote diagnostic session. For details, refer to
Chapter 5.3.4.
Camera: Open camera to take pictures.
5.3.4 Launch remote diagnosis (Device-To-Device)
The tablet is allowed to launch remote diagnosis with other diagnostic tools
(including but not limited to the X-431 EURO TAB II) of Launch family, which are
equipped with this module.
* Note: Before performing this operation, please make sure the following no matter
which side sends the remote request:

Turn on the vehicle power supply.

Throttle should be in a closed position.

The VCI device should be properly connected to the vehicle’s DLC and a successful
communication is required.
In Fig. 5-35, tap “Remote Diagnostic”, a pull-down menu including the following
options appears:
Fig. 5-36
These options are defined as follows:
Actions Results
Send remote
diagnostic reservation
Tap it and input the reservation title or scheduled date
of the remote diagnosis, and then tap “Confirm” to
send.
Request control
remote device
Request to control the partner’s device remotely to
help him diagnose the vehicle.
*Notes:

Remote diagnosis has the same diagnostic steps as
(c) Launch & Diagtools. Tel. +37167704152, +37129416069. www.diagtools.lv
Diagtools