X-431 EURO TAB II User Manual
40
screen.
Tap “Yes”, the system will automatically delete the currently existing trouble
code.
*Note: After clearing, you should retrieve trouble codes once more or turn ignition on
and retrieve codes again. If there are still some trouble codes in the system, please
troubleshoot the code using a factory diagnosis guide, then clear the code and recheck.
D. Read Data Stream
This option lets you view and capture (record) real-time Live Data. This data
including current operating status for parameters and/or sensor information can
provide insight on overall vehicle performance. It can also be used to guide
vehicle repair.
*Note: If you must drive the vehicle in order to perform a troubleshooting procedure,
ALWAYS have a second person help you. Trying to drive and operate the diagnostic
tool at the same time is dangerous, and could cause a serious traffic accident.
In Fig. 5-21, tap “Read Data Stream”, the system will display data stream items.
Fig. 5-23
On-screen Buttons:
Select Page
: Tap it to select all items of the current page. To select certain data
stream item, just check the box before the item name.
Select All:
Tap it to select all items of the current page. To select certain data
stream item, just check the box before the item name.
(c) Launch & Diagtools. Tel. +37167704152, +37129416069. www.diagtools.lv
To Next Page
Loading...
