X-431 EURO TAB II User Manual
44
Fig. 5-28
Report
: To save the current data as a diagnostic report. All diagnostic reports
can be accessed from “User Info” -> “My Reports” -> “Diagnostic Report”.
Record
: Tap to start recording diagnostic data. Recorded live data can serve as
valuable information to help you in troubleshooting of vehicle problems. All
diagnostic records can be replayed from “User Info” -> “My Reports” ->
“Diagnostic Record”.
*Note: The saved file follows the naming rule: It begins with vehicle type, and then the
product S/N and ends with record starting time (To differentiate between files, please
configure the accurate system time).
Help
: Tap to view the help information.
Save Sample
: This item enables you to customize the standard range of live
data stream items and save it as DS sample file. Each time you run the data
stream items, you can call out the corresponding sample data to overwrite the
current standard range.
Tap it to start recording the sample data (*Only data stream items with
measurement units will be recorded), and the screen displays as below:
(c) Launch & Diagtools. Tel. +37167704152, +37129416069. www.diagtools.lv
To Next Page
Loading...
