LAUNCH
33
File
: Choose diagnostic reports or local files to send.
Picture
: Choose screenshots or pictures to send.
Remote Diagnose
: To start a remote diagnostic session.
Camera
: Open camera to take pictures.
Tap
Clear
to delete all the partner’s dialog logs.
3. Launch Remote Diagnosis (Scanner-To-Scanner)
The tool is allowed to initiate remote diagnosis with other diagnostic tools, which are equipped with this
module.
On the function option selection screen, tap
Remote Diagnostic
, the following pull-down menu will
appear:
These options are defined as follows:
Request control remote
device
Request to control the partner’s device remotely to help him diagnose
the vehicle.
*Note: In process of remote diagnosis, tap the button to send a voice
message. Once vehicle diagnosis is complete, a report will be created. Input
your comments on this report, and then tap
Send Report
to send it to the
partner.
To Next Page
Loading...
