Learjet 36A - Page 93

Ili.lI, ••••••
AFfER LANDING/CLEARING RUNWAY
1. STAlL WARNING Switches - OFF.
2. AIR IGN Switches - OFF.
3. CABIN AIR or CAB AIR Switch - OFF.
4. Anti-Ice Systems:
a. PITOT HEAT Switches - OFF.
b. Windshield and Radome Alcohol- OFF.
c. Windshield Heat and Windshield Aux Defog Heat (if applicable)
- As required.
Maintain minimwn RPM required to keep windshield
clear.
d. NAC HEAT Switches - As MqUired.
e. STAB WING HEAT Switch - As required. Monitor WING
. TEMP and STAB TEMP Indicators to prevent overheat condi-
tion.
5.
lDG LT-TAXI Ughts and RECOG LT - As desired.
i!~
Do not use strobe lights when taxiing in the vicinity of
other aircraft. Navigation lights should be on for an
night operations.
6. Thrust Lever (on engine started first) - CUTOFF (optional).
i!~
Idle engine for 2 minutes prior to thrust lever rutoff.
7. SPOn.ER Switch - RET.
8. Raps-UP.
9. HYDRAUUC PRESSURE Gage - Check.
10. Unnecessary Avionics - OFF.
I 11. Transponder - Standby or Off.
2-36 FAA APPROVED 4-30-76
REISSUED 2-25-81, CHANGE 10