WaveJet 300A Series
26 WJ-A-GS-E Rev A
Updating the System Software
System software updates are downloaded through the USB memory port in the front of
the scope.
1. Insert the USB memory device,
containing the software update file
in a root directory, into the USB
port at the front of the scope.
2. Press the front panel UTILITIES
button.
3. From page 2/3 of the “Utilities”
menu, select Status & Update,
then Update.
4. Select OK from the “Update”
menu; software download begins.
The Replay LED on the front panel
flashes while download is in
progress.
To Next Page
Loading...
