Getting Started Manual
WJ-A-GS-E Rev A 29
LEVEL -- Selects the trigger threshold level.
Press the LEVEL knob to have the scope find
the trigger level automatically.
SETUP -- Displays the trigger setup menu.
AUTO -- Triggers the scope after a time-out,
even if the trigger conditions are not met.
NORMAL -- Triggers the scope each time a
signal is present that meets the conditions set
for the type of trigger selected.
SINGLE/STOP -- Arms the scope to trigger
once (single-shot acquisition) when the input
signal meets the trigger conditions set for the
type of trigger selected. If the scope is already
armed, it will force a trigger.
DELAY -- Horizontally positions the scope
trace on the display so you can observe the
signal prior to the trigger time. Press the
button to reset the delay to zero.
TIME/DIVISION -- Sets the time/division of the
scope timebase (acquisition system).
SETUP -- Displays the main horizontal setup
menu.
To Next Page
Loading...
