1. Updates both drives (C: and D:) and recovery area.
2. Exit
(8) The process to update the hard disk will start. It takes about 30 minutes to
complete it.
Display “Image Restoration Status” message.
(9) At the completion, the following message will appear
: Success: The operation completed without error.
==========================================================
cME Install is complete
==========================================================
Z:_\TOOLS\DISK>
(10) Remove the floppy disk from the floppy disk drive
(11) Press the Delete key while pushing Ctrl and Alt key.
Maintenance 6-21
To Next Page
Loading...
