LeCroy WaveSurfer 400 Series User Manual

6.4.2.9 BIOS setting
If the system does not boot up on the start-up floppy disk, please confirm “First Boot
Device” in the “Advanced BIOS Features” of the BIOS setting. Turn on the power while
pushing the Delete Key.
STANDARD CMOS Features
Date (mm: dd: yy):
Time (hh: mm: ss):
IDE Primary Master None
IDE Primary Auto
Access Mode Auto
IDE Primary Slave None
IDE Primary Slave Auto
Access Mode Auto
IDE Secondary Master None
IDE Secondary Master Auto
Access Mode Auto
IDE Secondary Slave None
IDE Secondary Slave Auto
Access Mode Auto
Drive A : None
Drive B : None
Video : EGA/VGA
Halt On : All, But keyboard
Advanced BIOS Features
CPU Internal Cache : Enabled
External Cache : Enabled
CPU L2 Cache ECC Checking : Enabled
Processor Number Feature : Enabled
Quick Power on Self Test : Enabled
Boot Sequence
First Boot Device : USB-FDD
Second Boot Device : USB-CDROM
Third Boot Device : HDD-O
Boot Other Device : Enabled
Swap Floppy Drive : Disabled
Boot Up Floppy Seek : Disabled
Boot Up Numlock Status : On
Gate A20 Option : Fast
Typematic Rate Setting : Disabled
Typematic Rate(Chars/Sec) : 6
Typematic Delay (Msec) : 250
Security Option : Setup
OS Select For DRAM>64Mb : Non-OS2
Video BIOS Shadow : Enabled
Small Logo (EPA) Show : Disabled
Advanced Chipset Features
DRAM Clock/Drive Control
Maintenance 6-25

LeCroy WaveSurfer 400 Series Specifications

General

Brand	LeCroy
Model	WaveSurfer 400 Series
Category	Test Equipment
Language	English