LeCroy WaveSurfer 400 Series User Manual

6-8 Maintenance
6.3.3 Installing Device Drivers
• Pressing finish will first install the device drivers. Displayed will be a dialog box
as shown below:
• Press Install, an error message box may appear as shown below:
• Press Continue Anyway, you may receive several more of the same dialog boxes,
accept each one.
• After this is complete you may be prompted to reboot:
• The XStream DSO application should automatically begin after power has been
restored and after Windows has finished booting up. As the XstreamDSO
application is launching the screen will appear as:

LeCroy WaveSurfer 400 Series Specifications

General

Brand	LeCroy
Model	WaveSurfer 400 Series
Category	Test Equipment
Language	English