(3) Configure so that others can access the folder C:\FW over the network with the
share name "FW". (If you use Windows XP, right-click the FW folder icon to call
up the FW Properties dialog box and configure the settings as shown on Figure
6.2)
Figure 6.1 Copy
destination
of the folders
Figure 2.2 Sharing
setup
6.4.2.4 Creating a network-ready startup disk
<Required items>
1. WS400 Series Control Program (DVD-R for loading on the hard disk)
2. PC with Windows running on it
3. DVD-ROM drive (irrespective of built-in type or external type)
4. Floppy disk drive (irrespective of built-in type or external type)
5. An empty floppy disk. A floppy disk label (Inscribe "Startup Disk for WS400
Series Control Program" on it.)
6. Master DVD labeled as "WS400 Series Control Program (DVD-R for loading
on the hard disk)"
Maintenance 6-17
To Next Page
Loading...
