Page 18 Safety Group 2
Release R1.07 en JET2 neo
Indicates important user information
for safe and effective working
Indicates recommendations for use
and other useful pieces of information
The high performance printer JET2 neo serves exclusively the contact-free marking,
inscribing and coding of surfaces using the continuous ink jet process.
The high performance printer can be used on the most varying materials (e.g. metal,
synthetic material, glass, paper, wood, pressed materials, rubber etc.) with both,
smooth as well as uneven, rough and stepped surfaces.
Only non pigmented inks can be processed!
The intended use of this device also includes the observance of all
instructions in this manual.
Using the installation for other purposes is considered contrary to its
intended use!
For safety reasons conversions and alterations are only admissible
following consultation with the manufacturer. Repairs to the device must
only be carried out with original replacement parts. The manufacturer
shall not be liable for damage resulting from use for other than the
intended purpose or misuse.
The device should be only operated outside of explosive areas!
The installation has to be carried out according to the installation
instructions of the manufacturer!
Precautions regarding electrostatics have to be carried out!
To Next Page
Loading...
