Leibinger JET2 neo - Switch off Device

Group 6 Operation – Elements and procedures Page 61
JET2 neo Release R1.07 en
 Button <Off> (10): With this button you can switch off the device.
You will find further information also in the Chapter Switch off
device!
 Button <Printstart> (11): With this button the print job will be released for
processing. If a print job is activated, the button is displayed backlighted. It will be
printed as soon as a PrintGo is released.
= Print start inactive (Print job is not released for processing)
= Print start active (Printer is in active print mode)
To carry out a print process, you have to enter a text or you have to select an existing
job. You will find further information regarding this topic in the group Job editor.
 Button <Printstop> (12): The released print job is stopped with this button. If a
print stop is activated, the button is displayed backlighted.
= Print stop inactive
= Print stop active (current print job is stopped or no job for
processing is released)