Leibinger JET2 neo - Carry out Fill up Routine

Group 5 Transport/Start up Page 41
JET2 neo Release R1.07 en
5.4.3 Carry out fill up routine
(Step 3)
After filling the consumables (ink and solvent) you have to carry out the fill up
routine.
Proceeding:
Figure 9
Fill up routine (Step 1)
Message during the routine
1 – TFT-Touch-Display
5 – Register card <Special funktions>
2 – Message <Initialization>
6 – Button <Fill up routine>
3 – Message <Emergency Shutdown>
7 – Message <Fill up routine>
4 – Schaltfläche <OK (3)>
8 – Button <Next>
3
2
4
5
7
8
6
1