Leibinger JET2 neo - Page 42

Page 40 Transport/Start up Group 5
Release R1.07 en JET2 neo
Proceeding:
Inflammable (Risk of fire)!
Combustible gases and liquids cause serious burns. Sources of
ignition must be kept away from the
device!
Attention!

Before the filling process a static discharge has to be carried out
necessarily
! For this you have to touch the cabinet of the printer
directly or you have to stand with ESD-
shoes on an grounded
surface before the filling or during the process!
 The sealing of the refill bottle should be not opened!
Now proceed absolutely according to the instructions in the chapter Execution of
the Tag-activation and refilling (page 257) in the group Equipping/Maintenance.
You will find supplementary information about the TAG-reader in the
chapter
TAG-reader (page 257).