Leibinger JET2 neo - Page 59

Group 6 Operation – Elements and procedures Page 57
JET2 neo Release R1.07 en
 Menu bar (4): The appropriate menus or specific functions of the JET2 neo can be
opened with the buttons in the menu bar. The following buttons are available:
Figure 16
Menu bar
Pos.
Button
Description
4.1
Edit current Job
Editor with the current loaded job opens.
4.2
Load job to print
Job selection menu opens.
4.3
Main menu
Main menu opens
4.4
Macro 1
Freely definable button 1
4.5
Macro 2
Freely definable button 2
If a button appears in grey, it is not available at the moment.
Example:
The two <Macro…> buttons can be freely defined to call frequently used menus or
functions directly for example.
Further information about the macro buttons can be found in the
chapter
Macro generator (page 117)!
 Status field <Printing speed> (5): In this field the current reached printing speed as
well as the max. possible printing speed under consideration of the made settings are
displayed. The display is carried out in the measurement m/min or inch/min, de-
pending on the selected adjustments in the basic settings.
available
not available
4.5
4.1
4.2
4.3
4.4