Leica DMIL - Page 2

To Next Page

To Previous Page

Phone/Tel./Tél. +49 (0) 6441-292519

Fax +49 (0) 6441-29 22 55

Issued in 1998 by/

Herausgegeben 1998 von/

Edition 1998 par:

Leica Microsystems Wetzlar GmbH

Ernst-Leitz-Strasse

D-35578 Wetzlar (Germany)

Responsible for contents/

Verantwortlich für den Inhalt/

Département responsable du contenu:

Marketing MQM, Product Management

Main Page

Table of Contents5
Important Notes6
Text Symbols and Their Meaning6
General Safety Information7
Application9
- Main Assemblies10
- Right Side of Microscope Stand10
- Left Side of Microscope Stand10
The Microscope and Its Components10
- Microscope Stand11
- Tube Holder11
- IL/L Tube Adapter11
- Eyepieces11
- Aperture Diaphragm12
- Condenser12
- Notched Lever for Condenser Level Adjustment12
- Specimen Stages and Accessories12
- IMC Modulator13
- Power Unit13
- Fluorescence Filter Block Slide13
- Incident-Light Fluorescence Facility13
- Rear of the Microscope14
- Ambient Conditions15
Installation Site15
Unpacking15
- Attaching the Condensers17
- Stabiliser Plate17
- Microscope with Transmitted-Light Illumination Column17
Setting up17
- Positioning the Transmitted-Light Illumination Carrier18
- Electrical Connection of the Transmitted-Light Illumination Carrier20
- Positioning the Tubes20
- DM ILB and DM ILT Tube20
- Tube from the DM L Range20
- HC L1T Tube21
- HC L1VT Tube21
- 1 IL/L Tube Adapter, 2 Lock Screw21
- 1 Lock Screw, 2 Tube Holder, 3 Tube21
- Eyepieces 10X/18 M Only22
- Positioning the Photo Eyepieces22
- Positioning the Graticules22
- Positioning the Eyepieces22
- Attaching and Removing the Objectives23
- Positioning the Filter23
- Attaching the Specimen Controller23
- 1 Filter Holder23
- Attaching the Stage Expansion24
- Inserting the Specimen Brackets24
- Specimen Stage with Expansions Attached24
- Selecting the Mains Voltage and Connecting Microscope to Mains Supply24
- Positioning the Filter Block Slide26
- Assembling the Fluorescence Filter Blocks26
Setting up the Options26
- Positioning the Phase Contrast Light Rings27
- Positioning the IMC Modulator28
- IMC Slit Diaphragm Slide and IMC Modulator28
- Assembling the 106* or 107* Lamp Housings29
- Replacing or Changing the Halogen Lamp29
- Opening the LH 107 Lamp Housing29
- LH 106 Lamp Housing, Opened30
- Assembling the 106 Z* Lamp Housing with Halogen Lamp30
- 107/2 Lamp Housing, Opened30
- Connecting to the 12 V/100 W Power Unit31
- Z Lamp Housing, Opened31
- Assembling the 106 Z* Lamp Housing with Hg and Xe Lamps32
- Front Panel of 12 V/100 W Leica32
- Rear Panel of 12 V/100 W Leica32
- 12 V/100 W Lamp Holder33
- Lamp Holders for Gas Discharge Lamps35
- Calculation of the Magnification on the Monitor36
- Microphotography36
- TV Adaptation36
- Adaptation of Imaging Systems on Binocular Photo Tubes36
- Positioning the Drawing Facility37
- Positioning the Multi-Discussion Facility37
- Microscope with Drawing Facility37
- Positioning the Magnification Changer38
- Positioning the Ergo Module38
- Switching on the 6 V/35 W Halogen Lamp39
- Adjustment Specimen39
Operation39
Basic Settings for Transmitted Light39
- Focusing on the Object40
- DM ILB Binocular Tube40
- Adjusting Tubes and Eyepieces40
- Correction for Defective Vision41
- DM ILT Trinocular Tube41
- DM ILB Tube41
- DM ILT Tube41
- Locking of Objectives42
- CORR Objectives42
- Immersion Objectives42
Operation of Objectives42
- Bright-Field Illumination43
- Adjusting the Condenser43
- Adjusting the Aperture Diaphragm43
Operation of Transmitted Light43
- Possible Errors44
- Transmitted-Light Illumination Unit with Condenser44
Operation of Phase Contrast45
Operation of Integrated Modulation Contrast (IMC)47
- Adjusting the Slit-Diaphragm48
- Optimising the IMC49
- IMC-Components49
Operation of Incident Light Fluorescence51
- 106 Lamp Housing52
- Schematic View for 106 Z Lamp Housing54
- Cleaning Painted Parts56
- Dust Protection56
- Cleaning the Speciment Stage56
Care and Maintenance56
- Handling Acids and Alkaline Solutions57
- Removing Immersion Oil57
- Cleaning the Objectives57
- Electrical Defects58
- Mechanical Defects58
- The On/Off Switch Does Not Work58
Troubleshooting, Lamp/Fuse Replacement58
- The Integrated Transmitted-Light Lamp Does Not Work59
- Replacing the Mains Fuse on the Microscope59
- Replacing the 6 V/35 W Halogen Lamp59
- 6 V/35 W Halogen Lamp, 2 Lamp Holder60
- The Additional Fluorescence Lamp Does Not Work60
- Mounting Screw for Lamp Housing60
- /2 Lamp Housing61
- /2 Lamp Housing, Opened61
- Lamp Housing, Opened61
Storage66
Packaging and Transport66
- Performance Data of Objectives67
- Objective Labelling67
Technical Description67
- Harmonic Components68
- Objective Type (Performance Class)68
- Colour Codes of Objectives69
- Performance Data of Eyepieces70
- Eyepiece Field of View Number70
- Field Performance of Objectives71
- Field Performance of Intermediate Modules71
- Performance Data of Filters72
- Grey Filter N/Neutral Filter72
- Green Filter, GR Panchromatic72
- Performance Data of Tubes73
- Tubes from the DM L Range74
- Field of View Number of DM L Tubes74
- S 90 0.23 Condenser75
- S 55 0.35 Condenser75
- Applications of Condensers S 90 and S 5575
- Performance Data of Condensers75
- Incident-Light Fluorescence Illumination76
- Performance Data of Lamp Housings76
- 107/2 Lamp Housing76
- 106 Z Lamp Housing76
- Centrable Lamp Housings77
- Overview of Lamp Housings with Order Numbers77
- Non-Centrable Lamp Housings77
- General Specifications78
- Specifications of the Power Unit79
- Tools/Adjustment Keys80
- Screw Covers for Unused Nosepiece Positions80
- Immersion Oil80
Main Wear and Replacement Parts80
EU Declaration of Conformity81
- Wichtige Hinweise86
- Allgemeine Sicherheitshinweise87
- Verwendungszweck89
- Das Mikroskop und seine Komponenten90
- Aufstellungsort95
- Auspacken95
- Aufstellen97
- Aufstellen der Optionen106
- Bedienung119
- Grundeinstellung Durchlicht119
- Bedienung Objektive122
- Bedienung Durchlicht123
- Bedienung Phasenkontrast125
- Bedienung Integrierter127
- Bedienung Auflicht-Fluoreszenz131
- Pflege und Wartung136
- Fehlersuche, Lampenwechsel und Sicherungswechsel138
- Lagerung146
- Verpackung und Transport146
- Objektive147
- Okulare150
- Filter152
- Tuben153
- Kondensoren155
- Technische Daten159
- Wichtigste Verschleiß- und Ersatzteile160
- EU-Konformitätserklärung161
- Remarques Inportantes166
- Informations de Sécurité Générales167
- Fin D'utilisation169
- Le Microscope Et Ses Composants170
- Site D'installation175
- Déballage175
- Installation177
- Installation des Options186
- Utilisation199
- Utilisation des Objectifs202
- Utilisation de la Lumière Transmise203
- Utilisation du Contraste de Phase205
- Utilisation du Contraste de Modulation Intégré (IMC)207
- Utilisation de la Fluorescence Par Lumière Réfléchie211
- Entretien Et Maintenance216
- Dépannage (Remplacement de Lampes/Fusibles)218
- Entreposage226
- Emballage Et Transport226
- Description Technique227
- Objectifs235
- Condenseur S 90 0.23235
- Spécifications239
- Principales Pièces D'usure Et de Rechange240
- Déclaration de Conformité UE241

Leica DMIL - Page 2

Table of Contents

Related product manuals