Operational Manual (Online Help)
308
GNSS Spider data streams
Two real time and one raw data stream can be configured on the receiver from an active GNSS Spider site at the same time.
A data stream configured in GNSS Spider is only visible and active on the receiver when the according site in GNSS Spider is
started. When the site is stopped, the data streams are deleted from the receiver. No data streams can be deactivated from
GNSS Spider on the GR/GM Series instrument.
Data streams created in GNSS Spider and uploaded to the receiver can however be deactivated in the web interface of the
GR/GM Series instrument.
To Next Page
Loading...
