For the AC/DC power supply:
WARNING
Electric shock due to missing ground connection
If unit is not connected to ground, death or serious injury can occur.
Precautions:
▶
The power cable and power outlet must be grounded!
1.6 Laser Classication
1.6.1 General
The following chapters provide instructions and training information about
laser safety according to international standard IEC 60825-1 (2014-05) and
technical report IEC TR 60825-14 (2004-02). The information enables the per-
son responsible for the product and the person who actually uses the equip-
ment, to anticipate and avoid operational hazards.
☞
According to IEC TR 60825-14 (2004-02), products classied as laser
class 1, class 2 and class 3R do not require:
•
laser safety ofcer involvement,
•
protective clothes and eyewear,
•
special warning signs in the laser working area
if used and operated as dened in this User Manual due to the low
eye hazard level.
☞
National laws and local regulations could impose more stringent
instructions for the safe use of lasers than IEC 60825-1 (2014-05)
and IEC TR 60825-14 (2004-02).
1.6.2 Scanning Laser
The laser incorporated in the product produces an invisible beam, which
emerges from the rotating mirror.
The laser product described in this section is classied as laser class 1 in
accordance with:
•
IEC 60825-1 (2014-05): “Safety of laser products”
These products are safe under reasonably foreseeable conditions of operation
and are not harmful to the eyes provided that the products are used and
maintained in accordance with this User Manual.
Description RTC360 RTC360 LT
Wavelength 1550 nm 1550 nm
Maximum pulse energy 1.5 µJ 1.5 µJ
Pulse duration 0.5 ns 0.5 ns
Maximum pulse repetition frequency
(PRF)
2 MHz 2 MHz
Beam divergence (1/e
2
, full angle)
0.5 mrad 0.5 mrad
Mirror rotation 100 Hz 100 Hz
General
General
12 Safety Directions
To Next Page
Loading...
Need help?
General
