Leica RTC360 - Electromagnetic Compatibility (EMC) Explained; EMC Explained

Description RTC360 RTC360 LT
Minimal base rotation speed
5 mHz 2.5 mHz
RTC360
60°
60°
0°
0°
360°
360°
90°
b
a
c
16139_006
Model: RTC360
Equip. No.: 1234567
Power : 24V 75W max.
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 01.2018
Made in Switzerland
Art. No.: 838300
S.No.: 2980001
WLAN PW: 12345678
Complies with 21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1 Ed. 3., as described in Laser
Notice No. 56, dated May 8, 2019.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
IP54
This device contains:
FCC ID: N6C-SXPCEAN2
IC: 4608A-SPCEAN2
IEC 60825-1: 2014
a Laser beam
b
Vertical laser scanning area
c Horizontal laser scanning area
Class 1 Laser Product
according to IEC
60825-1
(2014-05)
RTC360 LT
60°
60°
0°
0°
360°
360°
90°
b
a
c
19617_003
Model: RTC360 LT
Equip. No.: 1234567
Power : 24V 75W max.
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: 08.2019
Made in Switzerland
Art. No.: 877118
S.No.: 3005001
WLAN PW: 12345678
Complies with 21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1 Ed. 3., as described in Laser
Notice No. 56, dated May 8, 2019.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
IP54
This device contains:
FCC ID: N6C-SXPCEAN2
IC: 4608A-SPCEAN2
IEC 60825-1: 2014
a Laser beam
b
Vertical laser scanning area
c Horizontal laser scanning area
Class 1 Laser Product
according to IEC
60825-1
(2014-05)
1.7 Electromagnetic Compatibility (EMC)
The term Electromagnetic Compatibility is taken to mean the capability of the
product to function smoothly in an environment where electromagnetic radi-
ation and electrostatic discharges are present, and without causing electro-
magnetic disturbances to other equipment.
Labelling
Description
Safety Directions 13