Leica TL2 - Automatic Camera Shutdown

EN
141
Basic camera settings
Activating/deactivating daylight saving time Fig. 43 a/b
Fig. 43 a Fig. 43 b
• = off, = on
► Touch SET to confirm
Note:
Even if no battery is inserted or if the battery is flat, the date and
time settings are retained for around 2 days thanks to the built-in
back-up battery. However, after this time they have to be reset.
Automatic Camera Shutdown
If this function is activated, the camera switches to energy-saving
standby mode after the selected time (1/2/5/10/20min).
► In the main menu, select
►
Select
Notes:
• When the camera is in standby mode, it can be turned on at any
time by pressing the shutter button or by turning it off and on
with the main switch.