EN
142
Basic camera settings
Acoustic signals
On the Leica TL2 you can set whether you want particular opera-
tions or a full memory card to be indicated by tones, or whether
you prefer operation of the camera and photography itself to be
largely quiet.
► In the main menu, select
►
Select
► Select the required settings in the Volume, Click , SD card full,
AF Confirmation submenus (OFF, LOW, HIGH)
Monitor/viewfinder settings
For optimum visibility and to adapt to different lighting conditions,
the brightness and color reproduction can be adjusted.
Notes:
• The operations described below using the example of the moni-
tor settings also apply to the viewfinder settings, i.e. for the
EVF
BRIGHTNESS and EVF COLOR ADJUSTMENT menu items.
If the Leica Visoflex external electronic viewfinder available as an
accessory is not attached, these menu options cannot be
selected and the relevant function icons are grayed out.
• The viewfinder is turned on automatically - and the camera
monitor is turned off - as soon as the sensor in the eyepiece
detects that you are looking through the viewfinder. However, if
menu control is active, this does not happen until you tap the
shutter release. You can also switch on the viewfinder with the
function button, provided the latter is set accordingly (see next
page).
Brightness settings
► In the main menu, select
►
Select
or
► Select AUTO in the submenu (for automatic setting controlled by
the external brightness)
or
► Make the desired setting on the scale in the submenu using
or one of the setting dials
To Next Page
Loading...
