Leica TM30 Series User Manual

Reference Line TPS1200+/TS30/TM30 105
Next step
CONT (F1) closes the screen and returns to REFLINE Choose Reference Line.
<Height Offset:> User input The vertical offset of the reference
line/arc. Available for <Heights: Use
Start Point> and <Heights: Use Ref
Line>.
<DTM Offset:> User input The vertical offset of the DTM model.
Available for <Heights: Use DTM
Model>.
<Rotate Line:> User input Angle by which to rotate the reference
line. Available for task XX Line unless
<Heights: Use Ref Line> in REFLINE
Configuration, Heights page.
Field Option Description

Leica TM30 Series Specifications

General

Brand	Leica
Model	TM30 Series
Category	Measuring Instruments
Language	English