Figure 11. Recommended Tedding Procedure
3.6 Move the Lotus from the Working Position to the Headland
Position
1. Operate the tractor hydraulic system to lift the rotors to the headland
position.
3.7 Stop Tedding
Always switch off the tractor engine before you leave the tractor cab.
1.
Stop the tractor.
2. Operate the tractor hydraulic system to lift the rotors to the headland
position.
3. Disengage the PTO.
Wait for all moving parts of the Lotus to stop.
4. Switch off the tractor engine.
WARNING
WARNING
3-10 Operation
T-H001.1103EN
To Next Page
Loading...
