LELY 770 P - Test and Adjustment Procedures; Adjusting the Tines

4. TEST AND ADJUSTMENT
4.1 Adjust the Tines
1. Disengage the lock from the tine.
2. Move
the tine to the applicable position. The lock returns automatically.
Position A gives a large spread of the crop. Position B gives a small
spread of the crop.
If you want to ted the side of the field, set the tines of the rotor adjacent
to the side of the field to position B. This gives a small spread of the crop
at the side of the field and makes sure the crop stays on the field.
Figure 12. Adjust the Position of the Tines
Note:
Note:
Test and Adjustment 4-1
T-H001.1103EN